14-48 INCH A-2361 RWGV MJXFL

Sizes – 14", 16", 18", 20", 24", 30", 36", 42", 48"
Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed (thru 24”), FM 1120/1130 Approved (thru 16”), and certified to NSF/ANSI/CAN 61 and 372.
Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
Mechanical joint end complies with ANSI/AWWA C111 Standard
Ductile iron body and bonnet with nominal 10 mils Pro-Gard^® Fusion Bonded Epoxy coated interior and exterior surfaces; 42" and 48" valves coated with HP Epoxy coating.
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut (optional bevel or spur gearing) – open left or open right 30" - 48" require a Spur Gear or Bevel Gear
250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/34 barg) static test pressure
14" and 16" sizes – UL Listed, FM Approved: 250 psig (1725 kPa/17 barg)
18", 20" and 24" sizes – UL Listed: 175 psig (1200 kPa/12 barg); FM Approved: 250 psig (1725 kPa/17 barg)
Designed for potable water application

Low zinc, silicon bronze ASTM B98-C66100/H02 stem: 14”-16”, ASTM B763-C99500: 18”- 48”
Stainless Steel Stem Type 304, Type 316: 14"-48"
Bypass 16” - 48” (2” on 16”-20”; 2.5” on 24”; 3” on 30”- 36”, 4” on 42”-48”)
EPDM Disc and O-rings, 14”-16” optional, 18”-48” standard
Handwheel
Spur or bevel geared actuator
Position indicators